In this project, I’ll be showing you how to assemble and configure a Raspberry Pi Zero W to be used as a WiFi security camera,…
Author: Michael Klements
Hi, my name is Michael and I started this blog in 2016 to share my DIY journey with you. I love tinkering with electronics, making, fixing, and building - I'm always looking for new projects and exciting DIY ideas. If you do too, grab a cup of coffee and settle in, I'm happy to have you here.
Last month, I built an Arduino based reaction timer game, which allows you to challenge your friends and family to see who has the fastest…
I recently looked at how much power some common Arduino boards consume and how long we’d be able to power them using one or two…
I recently built a soil moisture monitor, which relies on a 18650 lithium-ion battery to power it. This got me wondering which Arduino would be…
In this project, I’ll be showing you how to build your own hanging gear weather station, which is made from laser-cut MDF components. An Arduino…
Do you often forget to water your indoor plants? Or perhaps you give them too much attention and over-water them. If you do, then you…
If you’ve been looking at getting into Arduino, but have been intimidated by the idea of having to learn both electronics and programming at the…
I made a laser-cut desktop tensegrity table set a few weeks ago and since then a number of people have asked for a similar 3D…
In this guide, I’ll be showing you how to build your own Arduino based obstacle avoiding robot car. The car uses a servo mounted ultrasonic…
I’ve seen quite a few people have added an air assist system to their K40 laser cutters using either an aquarium air pump or a…
