Easy Caprese Skewers, A Twist On A Summer Salad

If you’re looking for a quick and easy summer starter that doesn’t require any cooking, this is it. A caprese salad is a real Italian style, summer dish and serving it on a stick is an easy way for guests to enjoy it. You can use toothpicks or skewers to assembly them, I used 100mm (4″) skewers cut in half.

caprese salad

What You Will Need For about 16 Skewers

  • 300g (10oz) Cherry Tomatoes
  • 32 Small Basil Leaves (About 30g (1oz))
  • 120g (4oz) Block or Balls of Mozzarella Cheese

How To Make The Caprese Skewers

Wash and dry the tomatoes. If you are using a block of cheese, cut it up into 32 cubes. Pick the basil leaves from the stem, rinse and dry them.

First skewer a block or ball of cheese then a folded over basil leaf followed by the tomato, another folded basil leaf and finally a last block of cheese. Push the ingredients to the blunt end of the stick, leave a small gap to cut the stick in half and then begin with the second skewer. Only cut the skewer sticks in half after assembling them as there is only one sharp end and it is difficult to push the blunt end through a tomato neatly.

Serve the skewers with a drizzle of oil oil and balsamic vinegar. They can be made up beforehand and keep well in a sealed container in the refrigerator for a day or two although the basil leaves begin to wilt a little by the second day. Do not add the oil and vinegar until just before they are served.

If you love the tomato and basil combination, try our 10 minutes tomato and basil homemade pasta sauce for a quick and delicious dinner.

Have you tried making these tomato and basil caprese skewers? What other ingredients do you usually add? Let us know in the comments section below.

Michael Klements
Michael Klements
Hi, my name is Michael and I started this blog in 2016 to share my DIY journey with you. I love tinkering with electronics, making, fixing, and building - I'm always looking for new projects and exciting DIY ideas. If you do too, grab a cup of coffee and settle in, I'm happy to have you here.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest posts

Which NVMe Hat Is The Best For A Raspberry Pi 5

If you don’t know already, I’ve been selling these 3D printed cases for Raspberry Pi’s online for a few years now. With the launch...

Track Aircraft In Real-time With Your Raspberry Pi Using The FlightAware Pro

Have you ever seen a flight overhead and wondered where it is going? Or seen a unique-looking aircraft and wondered what type or model...

Pi 5 Desktop Case For NVMe Base or HatDrive! Bottom

Today we're going to be assembling a 3D-printed case for the Raspberry Pi 5 and Pimoroni's NVMe Base or Pineberry's HatDrive! This is an...

Related posts