How To Replace The Earpiece Speaker On An iPhone 6

Have you had problems with the earpiece speaker on your iPhone 6? Is the sound crackling or distorted or does it not work at all? If you’ve had any of these problems then you’ll want to try and replace the earpiece speaker. It’s a relatively easy repair, it should take you around 15-30 mins and the replacement earpiece cost under $10.

The guide below will take you through the process of replacing your iPhone 6 earpiece step by step.

If you’ve got other problems with you iPhone 6, have a look at these guides:

What You’ll Need To Replace Your iPhone 6 Earpiece

  • Your Damaged iPhone 6
  • Replacement Earpiece – Buy Here
  • iPhone Toolkit – Buy Here
  • Replacement Earpiece With Toolkit – Buy Here

How To Replace The Earpiece

Find yourself a nice flat and well lit area to work on. You’ll need an area to lay down the screws you have removed. I like to keep a small sheet of paper nearby and lay the screws I’ve removed down on the paper and mark off where they were removed from. There are a number of different sized screws on the cover plates and it’s important that you put them back in the correct places.

The two most important parts of this repair are to keep your screws really well organised so that you know exactly which one came out of where and to be careful when working with the ribbon cables, especially when opening up your phone, they are extremely fragile.

If you enjoyed this guide, have a look at these other iPhone repairs you can do yourself. Most iPhone repairs can be done at home for a few dollars, so don’t replace your iPhone until you’ve had a look at whether you can repair it at home first.

Good luck with your repairs and let me know how it went in the comments section below.

Michael Klements
Michael Klements
Hi, my name is Michael and I started this blog in 2016 to share my DIY journey with you. I love tinkering with electronics, making, fixing, and building - I'm always looking for new projects and exciting DIY ideas. If you do too, grab a cup of coffee and settle in, I'm happy to have you here.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest posts

Which NVMe Hat Is The Best For A Raspberry Pi 5

If you don’t know already, I’ve been selling these 3D printed cases for Raspberry Pi’s online for a few years now. With the launch...

Track Aircraft In Real-time With Your Raspberry Pi Using The FlightAware Pro

Have you ever seen a flight overhead and wondered where it is going? Or seen a unique-looking aircraft and wondered what type or model...

Pi 5 Desktop Case For NVMe Base or HatDrive! Bottom

Today we're going to be assembling a 3D-printed case for the Raspberry Pi 5 and Pimoroni's NVMe Base or Pineberry's HatDrive! This is an...

Related posts