Search
Get in Touch

Tag: Mobile Network

3D Printing

DIY 4G Air Quality and Environment Monitor – Record Data Anywhere

In this project, we’re going to use the Maduino Zero 4G by Makerfabs to make an air...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

I Tried 3 New Hats For The Raspberry Pi 5

Michael Klements - 0
Today we've got three new hats for the Raspberry Pi 5 that we will be trying out. I've used variants of each of these...

Beelink EX Docking Station For The GTi 14 Ultra

Michael Klements - 2
A couple of weeks ago, I tested the Beelink GTi 14 Ultra, a powerful mini PC with a full-size PCIe port underneath it. At...

I Tried The New TerraMaster F8 SSD Plus, Is It Any Good?

Michael Klements - 0
A few months ago I built an all-SSD NAS using a Raspberry Pi 5 and a quad-SATA hat from Radxa. By adding a 2.5Gb...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 21
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 146
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Fast Access

© The DIY Life | All rights reserved |