Do you often forget to water your indoor plants? Or perhaps you give them too much attention and over-water them. If you do, then you…
If you’ve been looking at getting into Arduino, but have been intimidated by the idea of having to learn both electronics and programming at the…
If you have a backyard, you can consider yourself lucky, as you’re already blessed with extra space in the fresh air that you can use…
I made a laser-cut desktop tensegrity table set a few weeks ago and since then a number of people have asked for a similar 3D…
In this guide, I’ll be showing you how to build your own Arduino based obstacle avoiding robot car. The car uses a servo mounted ultrasonic…
I’ve seen quite a few people have added an air assist system to their K40 laser cutters using either an aquarium air pump or a…
If you’ve used a stock k40 laser cutter, then you’ll know that positioning the laser for a cut is a bit of a guessing game.…
In this project, we’re going to be making a really easy tree canvas using hot glue and some basic craft supplies. They’re really cheap and…
While you can often sell your old iPhone to help pay for your next one, sometimes you’re left with one which is a bit too…
In this tutorial, we’re going to be looking at how to correctly set the current limit on an A4988 stepper motor driver. These stepper motor…
