3D Printed Corner Pieces In Black PLA

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - May 15, 2024 0

Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Is The New Orange Pi 5 Pro A Good Raspberry Pi 5 Alternative?

Michael Klements - April 24, 2024 0

Today we're going to be taking a look at the Orange Pi 5 Pro. This is a new SBC from Orange Pi that is...

Which NVMe Hat Is The Best For A Raspberry Pi 5

Michael Klements - March 27, 2024 3

If you don’t know already, I’ve been selling these 3D printed cases for Raspberry Pi’s online for a few years now. With the launch...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - May 12, 2016 146

Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

DIY Raspberry Pi 4 Desktop Case With OLED Stats Display

Michael Klements - October 26, 2020 162

Today I’m going to be showing you how to make your own desktop case for a Raspberry Pi 4, which looks like a mini...

Multiple Push Buttons on One Arduino Input

Michael Klements - May 17, 2019 29

The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...