3D Printed IoT Weather Station Dashboard

This is my dashboard for my 3D Printed IoT Weather Station project, you can build your own by following my build guide.

You can also view the data on my public Thingspeak Channel.

Temperature

Humidity

Barometric Pressure

Wind Speed

Light Level

Michael Klements
Michael Klements
Hi, my name is Michael and I started this blog in 2016 to share my DIY journey with you. I love tinkering with electronics, making, fixing, and building - I'm always looking for new projects and exciting DIY ideas. If you do too, grab a cup of coffee and settle in, I'm happy to have you here.

2 COMMENTS

    • Do you have any suggestions for PM2.5 and PM10 sensors? I’ve found a PM2.5 sensor that looks quite good, I’m still looking for a reliably PM10 sensor.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest posts

I Made A Pico ITX Case For My Rock 5 Model B

Following on from my initial review of the Rock 5 Model B, I eventually managed to get it to boot from an NVME drive....

Take Power With You On Days Out – EcoFlow River 2 Power Station Review

Today we're going to be taking a look at the EcoFlow River 2 portable power station. This is an all-in-one battery, charger, inverter and...

Level Up Your Homelab With The Raspberry Pi CM4 Compute Blade

Today we’re going to be taking a look at the Compute Blade, a rack-mountable PoE (Power over Ethernet) carrier board for a Raspberry Pi...

Related posts