Search
Get in Touch
HomeProjectsK40 Laser Modifications

K40 Laser Modifications

View Category
K40 Laser Modifications

How To Add A Radial Fan Air Assist System To A K40 Laser Cutter

I've seen quite a few people have added an air assist system to their K40 laser cutters...
Michael Klements -
Read
K40 Laser Modifications

How To Add A Red Dot Pointer To A K40 Laser Cutter

If you’ve used a stock k40 laser cutter, then you’ll know that positioning the laser for a...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

3D Printed IoT Weather Station Dashboard

Michael Klements - 0
This is my dashboard for my 3D Printed IoT Weather Station project, you can build your own by following my build guide. You can also...

I Upgraded My 3D Printed Weather Station Using Your Suggestions

Michael Klements - 0
Today we’re going to be making some upgrades to my previously built IoT weather station using suggestions that you guys made in the comments...

Raspberry Pi 4 SSD Case With Stats Display

Michael Klements - 0
In this project, we're going to be taking my previous Raspberry Pi Desktop Case design and adapting it to accommodate an SSD underneath the...

Most Popular

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 133
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

DIY Raspberry Pi 4 Desktop Case With OLED Stats Display

Michael Klements - 142
Today I’m going to be showing you how to make your own desktop case for a Raspberry Pi 4, which looks like a mini...

How To Upgrade Your Home’s Entrance & Increase Curb Appeal

Michael Klements - 1
Your entrance or front door to your home is the first thing people look at when they walk past, drive past or come to...

Fast Access

© The DIY Life | All rights reserved |