3D Printing

Introducing Lab Rax: A 3D Printable & Modular 10″ Rack System

Today, I’m excited to introduce Lab Rax, my latest 3D-printable project—a fully modular and customizable 10-inch server rack system for homelab enthusiasts. Whether you're managing Raspberry Pi setups, mini PCs,...
Michael Klements -
Electronics Projects

LattePanda’s New IOTA SBC – A Palm-Sized N150 Board for Makers

LattePanda’s latest release, the IOTA, packs Intel’s new N150 processor into a board barely larger than a Raspberry Pi. Despite its small...
Michael Klements -
3D Printing

I Built a Pi 5 AI Chatbot That Talks, Blinks, and Looks Around!

There’s something fun about bringing tech to life, literally. Today’s project is all about that, building an...
Michael Klements -
Read
Electronics Projects

A Pi Cluster That Fits in the Palm of Your Hand – The Sipeed Nanocluster

Building a Raspberry Pi cluster usually means dealing with messy cables, stacks of boards, and a tangle...
Michael Klements -
Read
Electronics Projects

LattePanda’s New IOTA SBC – A Palm-Sized N150 Board for Makers

LattePanda’s latest release, the IOTA, packs Intel’s new N150 processor into a board barely larger than a...
Michael Klements -
Read
3D Printing

Turn your 10″ Homelab into a NAS with 3D Printable Shelves

If you’ve been following my projects, you’ll probably remember my Lab Rax system, a 10-inch modular and...
Michael Klements -
Read

Raspberry Pi Projects

Explore my projects which all use a Raspberry Pi

View Projects

Pi 5 NAS With Custom Carbon Fibre Panels, Made on the Makera Z1!

Today, I'm going to be building a low-power SSD NAS that is built around the Raspberry Pi 5. This Pi 5 NAS offers...
Read

I Built a Pi 5 AI Chatbot That Talks, Blinks, and Looks Around!

There’s something fun about bringing tech to life, literally. Today’s project is all about that, building an AI chatbot that blinks, looks around,...
Read

A Pi Cluster That Fits in the Palm of Your Hand – The Sipeed Nanocluster

Building a Raspberry Pi cluster usually means dealing with messy cables, stacks of boards, and a tangle of power supplies. But what if...
Read

Arduino Projects

Explore my projects which all use an Arduino or the Arduino IDE

View Category

I Turned PET Bottles Into A 3D Printed Pi Case – PET Bottle Recycler Part 2

A few weeks ago I published a project on the controller that I designed for a PET bottle recycler that I've been working...
Read

PET Bottle Recycler Part 1 – Using An Arduino Uno R4 To Control A 3D Printer’s Hotend

Today we're going to be using the new Arduino Uno R4 WiFi to build a controller for a PET bottle recycler. I'm doing...
Read

Meet Bittle, an Advanced Open-Source Robot Dog by Petoi

This is Bittle, a ready-to-run advanced open-source robot dog by Petoi that is based on the OpenCat robotic pet framework. If you’ve ever wanted...
Read

Tutorials

Guides to getting familiar with components or programming functions

View Category

What Makes TMC2208 Stepper Motor Drivers Silent

A while ago I did a bit of an experiment to compare the sound level between TMC2208 and A4988 stepper motor drivers. At...
Read

Grafana Weather Dashboard using InfluxDB and an ESP32 – In-Depth Tutorial

Following one of my previous projects where I built a weather station dashboard using InfluxDB and Grafana on the reTerminal, I had quite...
Read

Making An Ultra Low Power Arduino Pro

This 3.3V Arduino Pro Mini uses over 600 times less power than a traditional Pro Mini, using a couple of simple, low power,...
Read

Projects

Some of my other projects I've been working on, typically not electronics related

View Category

Pi 5 NAS With Custom Carbon Fibre Panels, Made on the Makera Z1!

Today, I'm going to be building a low-power SSD NAS that is built around the Raspberry Pi 5. This Pi 5 NAS offers...
Read

I Built a Pi 5 AI Chatbot That Talks, Blinks, and Looks Around!

There’s something fun about bringing tech to life, literally. Today’s project is all about that, building an AI chatbot that blinks, looks around,...
Read

Turn your 10″ Homelab into a NAS with 3D Printable Shelves

If you’ve been following my projects, you’ll probably remember my Lab Rax system, a 10-inch modular and 3D printable rack I designed to...
Read

Latest Posts

My latest projects, tutorials and reviews

Electronics Projects

Pi 5 NAS With Custom Carbon Fibre Panels, Made on the Makera Z1!

Today, I'm going to be building a low-power SSD NAS that is built around the Raspberry Pi...
Michael Klements -
Read
3D Printing

I Built a Pi 5 AI Chatbot That Talks, Blinks, and Looks Around!

There’s something fun about bringing tech to life, literally. Today’s project is all about that, building an...
Michael Klements -
Read
Electronics Projects

A Pi Cluster That Fits in the Palm of Your Hand – The Sipeed Nanocluster

Building a Raspberry Pi cluster usually means dealing with messy cables, stacks of boards, and a tangle of power supplies. But what if you could shrink all of that into...
Michael Klements -
Electronics Projects

LattePanda’s New IOTA SBC – A Palm-Sized N150 Board for Makers

LattePanda’s latest release, the IOTA, packs Intel’s new N150 processor into a board barely larger than a...
Michael Klements -
Read
3D Printing

Turn your 10″ Homelab into a NAS with 3D Printable Shelves

If you’ve been following my projects, you’ll probably remember my Lab Rax system, a 10-inch modular and...
Michael Klements -
Read
Electronics Projects

TRMNL: The Open Source Smart Display You Can Also Build Yourself

Imagine a little screen on your desk, wall or even fridge, quietly updating you with your calendar,...
Michael Klements -
Read
Electronics Projects

This $40 Pi 5 Case By Elecrow Packs In A Lot Of Features

The Raspberry Pi 5 is powerful enough to be used as a mini desktop computer, and many...
Michael Klements -
Read